This car is a common market Dayun Aopoli 1735mm wide single row cab, using the traditional design of Dayun network, both sides of the two-in-one design, turn signal and day lights are integrated together, for the vehicle driving escort. Cab can seat 2 people, configuration of air conditioning, direction power, large space, high comfort.
The car is powered by the Yunnedway D20 series 126hp National Six diesel engine with a maximum torque of 350N.m and a rated speed of 3200rpm. The maximum output power is 93kW, the displacement is 2L, or relatively fuel-efficient engine; It's a five-speed Farist transmission. It's a golden combination.
It adopts 3.3m wheelbase, 140*4*660mm girder, 1030 rear axle, 7.00 tires and lightweight design, which is well evaluated in the industry.
The whole vehicle is 5.998 meters long, 2.03 meters wide and 2.95 meters high. The total mass is 4.495 tons. It is a compliance blue brand aerial working car.
The upper arm form is thickened five-section hexagonal telescopic arm type, working height is 27 meters, working range is 6.8 meters.
The big arm turntable can be fully rotated 360 degrees. Advanced turboworm reducer is adopted, with self-lubricating and self-locking functions. Later maintenance can be easily achieved by adjusting the bolt position.
The big arm adopts imported hydraulic parts. The hydraulic system can realize the interlock on and off the vehicle to prevent the danger of misoperation. It is not only stable in reversing, but also flexible and convenient in operation. The hydraulic tubing is also outsourced to avoid damage caused by friction.
The car is also equipped with 1 ton hydraulic winch and hook, which can be used as a crane.
Patterned aluminum plate made of walking board, stainless steel fence, aluminum alloy profile edge, both beautiful and durable.
The stainless steel working bucket is 1.5 meters long, 0.65 meters wide, 1.15 meters high, the load is 200KG, the maximum experimental load is 400KG. This work bucket is made of tip-bucket type, convenient to use later.
The front and rear legs are V-shaped square box full-package legs, the transverse span of the legs is 5.5 meters, the longitudinal span is 4.6 meters, the leg span is large, good stability, and equipped with "soft leg" protection function, can be operated at the same time or alone, adapt to a variety of working conditions, in order to ensure the stability and safety of the vehicle in operation.
A leg operation box is made on the left side of the vehicle. The operation box is equipped with a multi-way valve and a 5-inch LCD screen, as well as a remote control, which can remotely view and detect the arm length, elevation Angle, platform height, operation height, etc.
The operation table and safety seat are also installed on the big arm turntable, which is convenient and safe to operate. There is also the option of installing an operating room.
An external power supply is installed in the stainless steel tool box on the right side of the vehicle, which can be used for emergency power failure. A radiator is also installed next to the fuel tank for high safety factor.
This Dayun Ao Puli Guolvi 27m telescopic boom type aerial working vehicle is painted grass green, looking environmental protection and bright; And the vehicle configuration is high, the height of the operation is high, both practical and convenient, is a good choice.
