In the flat wrecker, there are several types of plates, including the tail hydraulic flip plate, flat plate, sinking plate, hydraulic expansion plate, folding plate and integrated plate. In addition to the sinking plate, the other plates are the tail plates are a function, in order to facilitate the failure of the car on the board; The sinking plate is not the same, the difference between the board is that the auxiliary beam and the girder are completely fitted, and the advantage of this is that the whole plate will be lower from the ground, and the slope will be smaller. To say in the wrecker, which board is best to use, or to count the sinking board is best to use! Today, let's talk about Dayun G6 sunken 6 tons one tow two wrecker! This car uses Hubei Dayun G6 single row 2 meters 08 wide cab, large space; Silver gray interior design, classic and practical; Standard electric Windows, central lock, air conditioning, ABS and other configurations. Powered by Yuchai 165hp engine with Fast 8-speed box, it can easily cope with various working conditions on the road! The chassis adopts 2.5 tons front axle, 7 tons rear axle, 245 vacuum steel wire tires, 232 original three-layer girders, the chassis is rock-solid! Also standard intelligent fuel saving switch, according to no-load, standard load, heavy load to intelligent fuel saving! The whole vehicle is 8.72 meters long, 2.55 meters wide, 2.65 meters high, with a total mass of 11.995 tons and a repair mass of 6.9 tons. The plate is made of 6 tons of pattern plate made of 6 tons of thick high-strength steel, and the border is made of 16㎜ steel plate, 8㎜ double-thickened chute and double beam. Using the sinking process, ultra-low slope, the board is only 1.05 meters from the ground, the center of gravity is low, the driving is stable, and the car Angle is low. The total length of the plate is 6.66 meters, the width is 2.48 meters, the hydraulic turnover of the tail, the use of imported multi-way valve, bilateral linkage, easy operation; Make 6 tons of two section rear bracket, using the way of hanging girder, dragging more powerful; Standard with 6 tons of hoist, 25 meters of steel wire rope, a set of auxiliary trolley, two pairs of fork, a pair of fork seat, a toolbox, four binding belts, to make its rescue easier. This Dayun G6 sunken 6 tons one tow two wrecker compared with the 4 meters 5 wheelbase of the competitive model is more cost-effective, whether it is a good choice in terms of configuration or workmanship quality, want to know more about the sustainable concern of wrecker.
For more information about our vehicles, please feel free to contact Ms. Lily. We will customize the truck according to your requirements.
Sales Manager: Lily+86-13177185858